It’s pH-neutral and won’t harm even delicate antiques while it removes rust down to the bare metal. If you want powerful rust removal without harsh chemicals or irritation, a bottle of nontoxic Evapo-Rust is the way to go. The Spruce Home Improvement Review Board.I would definitely recommend using Metal Rescue™ as unlike so many products you find on the internet this one really does do exactly what it says. The Metal Rescue™ worked brilliantly and I have had no problems with rust in the filter since. The liquid had changed to more of a black colour and the inside of the tank, to my surprise, looked like a new tank, the metal was shining and there was no trace of the rust. When the time was up I took the tape off and poured the Metal Rescue™ out in to another container. I left it for about 24 hours then turned it upside down and let it soak again for 24 hours. I filled the tank a little over halfway then taped up the filler cap hole. I removed the petcock and filler cap and washed out the tank as instructed, then I taped up the petcock hole and, once I had made sure it was not going to leak, I poured in the Metal Rescue™. When I received my Metal Rescue™ it was exactly as described, safe and easy to use. The staff were very helpful and they arranged a delivery of some Metal Rescue™. I figured it was worth a try so I sent off an email to see if I could get some shipped to me. I came across Metal Rescue™ online and there were a few videos saying how good it was and easy to use and, to be honest, it sounded a bit to good to be true to me, being the sceptic I am. I talked to several people, but no one could give me an easy way of getting rid of the rust, so I searched online to see if there was anything out there to help. The inside of the tank was completely solid with rust and was blocking the inline filter that I had installed. "I was looking for some way of removing the rust out of an old Honda CBR 250 fuel tank. This information is based on existing knowledge and is not binding.
Skilled technicians are constantly reviewing and developing new products that are most often, customer led. Specific gravity will change from 1.04 to 1.08. The GEL will darken in colour as it removes rust.
Optimal operating temperatures for Metal Rescue GEL are 20✬ (68✯) to 65✬ (150✯). We recommend limiting the application of GEL to surface areas no larger than approximately 381 mm by 381 mm at a time (which is equal to theĬoverage capacity of one container of GEL) if applied at 3.17 mm thick as indicated in the instructions for use.įor iron and steel metal parts that can be soaked, Metal Rescue Rust Remover Bath is recommended. Size area of rust as long as you have the ability to keep it moist using common Inches) of surface area if applied 3.17 mm thick. One 500g container of Metal Rescue GEL will cover 0.148 square metres (230 sq. Metal Rescue Gel is not recommended for use on magnesium or magnesium alloys, zinc or aluminium.
It is recommended that these metals be checked approximately every 30 minutes so as not to damage to surface under the oxidation layer.Īlso completely safe on rubber, plastic, clothing, glass and other surfaces are unharmed by water alone. Solder or solder points – CONTACT TIME MUST BE CHECKED, as the length of contact time is dependent upon the amount of oxidation present and alloy composition.
Safe on brass, copper, chrome, gold, lead, nickel, silver, titanium, tungsten, GEL will remove some oxides from copper, brass, and nickel but contact time is critical. Safe on metals other than iron and steel as long as they are not left in contact with GEL for too long. TechCorro™ Metal Rescue™GEL is a rust remover designed for iron and steel.
0 kommentar(er)
